We execute full testing and commissioning of GAFCO installations using certified protocols in accordance with ISO 14644, EU GMP, and FED 209. Advanced diagnostic tools confirm compliance of cleanroom performance and HEPA/ULPA filter integrity. Every installation receives formal validation and a comprehensive performance certificate confirming operational readiness and reliability.

We provide scheduled maintenance for all GAFCO equipment, including filter replacement, component servicing, and performance checks. Our technicians ensure consistent efficiency, prevent failures, and extend equipment lifespan.

Class III biosafety cabinets fully enclosed, isolating the product/specimen from the environment and operator for maximum protection. Built and designed to protect product, operator, and environment. Equipped with handling gloves and a smart controller to enable constant auto‑calibration function, a constant 100% exhaust air ratio and inflow velocity of 100 FPM along the filter’s lifespan. Built to either exhaust the HEPA‑filtered air back to the laboratory or exhaust the air outside the facility using a duct connection. They are suitable for work using biological agents without volatile toxic chemicals in BSL‑1, BSL‑2, BSL‑3, and BSL‑4 laboratories.

Equipped with a smart controller to enable constant auto‑calibration function, a constant 100% exhaust air ratio and an inflow velocity of 100 FPM along the filter’s lifespan. Built to exhaust all HEPA‑filtered air outside the facility using a duct connection only (no recirculation). They are suitable for work using biological agents without volatile toxic chemicals in BSL‑1, BSL‑2, BSL‑3, and BSL‑4 laboratories. Available in NSF‑49 design and GAFCO SMART design.

Equipped with a smart controller to enable constant auto‑calibration function, a constant 75% exhaust air ratio and an inflow velocity of 100 FPM along the filter’s lifespan. Built to either exhaust the HEPA‑filtered air back to the laboratory or exhaust the air outside the facility using a duct connection. They are suitable for work using biological agents without volatile toxic chemicals in BSL‑1, BSL‑2, BSL‑3, and BSL‑4 laboratories. Available in NSF‑49 design and GAFCO SMART design.

Class II A2 biosafety cabinets built and designed to protect product, operator, and environment. Equipped with a smart controller to enable constant auto‑calibration and constant 30% exhaust air ratio and inflow velocity of 100 FPM along the filter’s lifespan. Built to either exhaust the HEPA‑filtered air back to the laboratory or exhaust the air outside the facility using a canopy connection. They are suitable for work using biological agents without volatile toxic chemicals in BSL‑1, BSL‑2, and BSL‑3 laboratories. Available in NSF‑49 design and GAFCO SMART design.

Class II A1 biosafety cabinets built and designed to protect product, operator, and environment. Equipped with a smart controller to enable constant auto‑calibration and constant 30% exhaust air ratio and inflow velocity of 75 FPM along the filter’s lifespan. Built to either exhaust the HEPA‑filtered air back to the laboratory or exhaust the air outside the facility using a canopy connection. They are suitable for work using biological agents without volatile toxic chemicals in BSL‑1 & BSL‑2 laboratories. Available in NSF‑49 design and GAFCO SMART design.

Class I biosafety cabinets built and designed to protect operator and environment from the product or specimen. Equipped with a smart controller to enable constant auto‑calibration and constant inflow as the filter clogs. Built to either exhaust the HEPA‑filtered air back to the laboratory or exhaust the air outside the facility using a canopy connection. They are suitable for work using biological agents without volatile toxic chemicals in BSL‑1 laboratories. Available in NSF‑49 design and GAFCO SMART design.

We help you address air‑quality challenges and design optimal environmental conditions for your processes. With extensive experience solving complex air‑quality problems, we deliver tailored solutions built around your needs. Our certified specialists ensure your facility meets the highest global standards while maximizing operational efficiency.

Final filter for clean rooms, Hygiene TXA™ modules ensure target levels of indoor air quality are achieved to protect people and processes at the last stage of air control. Designed to be convenient, easy to install and maintain, Hygiene TXA™ modules accept gel and gasket‑sealed mini pleat HEPA and ULPA filters, come in a wide range of standard and custom sizes as well as optional accessories featuring a top access inlet neck.

We assist clients perform filter replacements for critical environments, ensuring correct installation, proper sealing, and safe disposal of contaminated filters. Our trained technicians follow industry best practices to ensure consistent performance, safety, and operational continuity.

We conduct HEPA and ULPA filter leak testing in accordance with EN 1822 standard and industry best practices. Using certified aerosol generation and scanning methods, we identify leaks, verify sealing integrity, and ensure your critical environments maintain proper contamination control and performance.

Constant air volume (CAV) fume hoods provide a constant quantity of airflow, yet air velocity increases as the sash is closed and decreases when the sash is opened wider. Designed to overcome the drawbacks of non‑bypass hoods. They have an additional opening above the sash that adjusts itself according to the movement of the sash. So even when the sash is opened widely or completely closed, the bypass opening adjusts accordingly to prevent flow velocity from increasing or decreasing, providing better protection against toxic gases, designed to save energy and reduce operational costs.

Reduced air volume (RAV) fume hoods are suitable for low toxic emissions. The opening of the bypass is partially obstructed in these ductless units, reducing overall airflow required to maintain a negative pressure environment.

We provide expert consultation for cleanroom design and compliance based on ISO 14644 standards. Our specialists evaluate process needs, airflow concepts, zoning, filtration strategy, and layout criteria to help you develop efficient, compliant, and cost‑effective cleanroom facilities tailored to your operational requirements.

We perform complete cleanroom testing and classification in accordance with ISO 14644 standards. Using calibrated instruments and certified procedures, we verify particle concentration, airflow performance, and room compliance to ensure your controlled environment meets its required classification level.

Horizontal flow clean benches provide product protection against contaminants, maintaining a Class 5 (or less) working environment by keeping the work bench area under constant positive pressure. Designed to capture room air and pass it through the fan‑powered filtration system and directing the air horizontally from the front of the unit across the work area and out towards the user at a constant speed. Horizontal flow clean benches are equipped with a vast range of standard and optional accessories and may be customized to suit your working conditions and application criteria.

Provides optimum sterility and protection for laboratory animals, the units are designed to create a stream of laminar airflow from above the work zone downwards to the bench base. This pattern of downflow movement is done through a combination of pre‑filters and HEPA filters arranged in parallel above and below the work zone, making animal transfer a safe contamination‑free process during animal cage changes and providing further protection to the operator since no air is allowed to flow outside this system. Supplied with LED lighting, outlets, mobile and versatility. Animal transfer stations may be customized to any size and come with a wide range of standard and custom options to meet your specific needs and application requirements.

Vertical flow clean benches provide product protection against contaminants, maintaining a Class 5 (or less) working environment by keeping the work bench area under constant positive pressure. Designed to capture room air and pass it through the fan‑powered filtration system and directing the air vertically from the top of the unit downwards over the work area and out towards the user at a constant speed. Vertical flow clean benches are equipped with a vast range of standard and optional accessories and may be customized to suit your working conditions and application criteria.

Our certified engineers perform precise calibration of biosafety cabinets, validating velocity, uniformity, and containment per international standards. We ensure containment integrity and compliant operations in sensitive laboratory environments.