Pro‑TECHT™ is a customizable single‑stage built‑up filter bank designed for any air‑intake dimension to protect downstream equipment. Constructed from galvanized steel or extruded aluminum profiles, it features an easy‑lock mechanism and supports a wide range of pre‑filters and medium‑efficiency filters.

Synthetic media pads are available in a wide range of thicknesses, classes, and compositions to suite a variety of applications such as self service panel filters, pre-filters in commercial HVAC systems, unitary equipment’s, unit ventilators, fan coil units, and packaged terminal air conditioners.

Final filter for clean rooms, Hygiene TSS™ modules ensure target levels of indoor air quality are achieved to protect people and processes at the last stage of air control. Designed to be convenient, easy to install and maintain, Hygiene TSS™ modules accept gel and gasket‑sealed mini pleat HEPA and ULPA filters, come in a wide range of standard and custom sizes as well as optional accessories featuring a top access inlet neck.

GaShield TRY™ is a tray‑type molecular filter housing that can be customized for any application. It supports multiple tray depths, finishes, and accessories, and can be customized to target any specific gas or contaminant load. Its compact, robust design ensures reliable operation and precise filtration performance.

Autoklean™ systems are long‑term cost‑effective pre‑filtration solutions featuring a compact design with an exceptionally large surface area for mass filtration. A programmed pressure gauge continuously calculates differential pressure and, through an electrical circuit, triggers the system to automatically unwind the roll, exposing new clean filter media from the top cassette while the bottom cassette takes up the used contaminated media via an automated differential pressure control system.

ArmOR SLD™ modules further enhance laminar flow patterns by eliminating blank sections within the air stream ensuring target levels of air quality are achieved thoroughly over the entire critical surgical area. Designed to be convenient, easy to install and maintain, ArmOR SLD™ modules are built for operation theatres where lighting fixtures are installed away from the ceiling filtration system. The system accepts both gel and gasket‑sealed mini pleat HEPA and ULPA filters and come in a wide range of standard and custom sizes as well as optional accessories.

A portable, self‑powered, semi‑silent air purifier designed to convert standard neutral patient rooms to negative pressure rooms by collecting excess air and purifying it before it is transferred to other zones within the facility. Designed to serve two purposes — a negative pressure builder or a standalone air purifier for any zone — through its built‑in HEPA or ULPA filter. Ventex™ PFFU’s are made of stainless steel casings and may be equipped with a number of standard and optional accessories. The controller features a filter life span indicator, an indoor air quality indicator, a UV light on/off switch, and up to 9 speeds with a turbo mode function for fast cleaning cycles.

A self‑powered, low‑profile gas‑phase fan filter unit engineered for molecular filtration using advanced adsorbent media. This model features a top‑inlet design for vertical airflow. Its low‑vibration, low‑noise design ensures uniform airflow across activated carbon or chemisorptive beds, delivering effective removal of odors and gaseous contaminants. Built in stainless steel and compatible with remote control and networked operation for critical environments.

Carbon impregnated panel filters provide both particulate filtration and assistance with low non‑critical odor filtration, the filters can be used to verify the effectiveness of carbon filters in controlling odors in ventilation systems and exhaust fans.

Configurable three‑stage air filter housings, customized to any air flow volume and may be equipped with a vast range of air filters and optional accessories. Designed for simplified maintenance, constructed from sturdy metals, dynamically built to fine tolerances for a perfect fit, the units are individually leak and pressure tested, and incorporate latching hinges. Doors can swing right, left, or be removed to improve accessibility, featuring single or dual access doors for each section, and may be equipped with a vast range of optional accessories.

Pro‑TECHT PLUS™ is a customizable two‑stage built‑up filter bank designed for any air‑intake dimension requiring enhanced protection. Constructed from galvanized steel or extruded aluminum profiles, it features an easy‑lock mechanism and supports a wide range of pre‑filters and secondary medium‑efficiency filters for higher particulate control.

Mass produced to protect and extend the life of higher efficiency filters in gas turbine and power‑generating applications, MasterPleat GT™ disposable filters are an excellent choice in two‑stage HVAC systems highly recognized for their sustained performance and ease of use in a variety of residential, commercial, and industrial applications.

Inertia separators are high‑efficiency filter housings that deliver exceptional performance on coarse particles. Inertia filters operate on the principle of inertia, built from engineered vanes that eliminate heavy contaminated air streams from clean air at high velocity while the heavier particles continue past the blades and into the dust bin. A separation efficiency of up to 99% on 5‑micron particles may be achieved. Thanks to the inertia of large particles, they are forced to move out of the system and clean air is only allowed to pass through. Inertia‑Cell™ systems may be supplied with fans, dual fans, and equipped with several optional accessories.

Final filter for clean rooms, Hygiene SXA™ modules ensure target levels of indoor air quality are achieved to protect people and processes at the last stage of air control. Designed to be convenient, easy to install and maintain, Hygiene SXA™ modules accept gel and gasket‑sealed mini pleat HEPA and ULPA filters, come in a wide range of standard and custom sizes as well as optional accessories featuring a side access inlet neck.

Glass fiber media pads made from non viscous, progressive density, lofted glass fibre finished with a special adhesive coating for enhanced filtration performance, developed for heavy duty industrial use, and considered a superior choice for residential and commercial installations.

GaShield CYL™ is a cylindrical gas‑filter housing built for canister‑type molecular cartridges. Customizable for any gas or application, it offers durable powder‑coated construction, gasket‑sealed doors, and cross‑locked framing to eliminate air bypass. Available in a wide range of configurations and accessories.

ArmOR PWD™ modules utilize their built‑in fans to recirculate up to 80% of air supplied by the HVAC system providing a more energy‑efficient system and a lower overall total cost of ownership to building operators. ArmOR PWD™ are energy‑efficient and power‑saving modules delivering laminar flow air flow patterns achieved to critical surgical rooms. Designed to be convenient, easy to install and maintain, ArmOR LMF™ systems accept both gel and gasket‑sealed mini pleat HEPA and ULPA filters and come in a wide range of standard and custom sizes as well as optional accessories.

A portable, self‑powered barrier purifier designed for use during patient inspection or treatment in high‑risk clinical areas. Virushield™ draws air directly from the patient zone, pulling it through a high‑efficiency HEPA filtration stage and an internal UV‑disinfection chamber to reduce airborne pathogen transfer. Its low‑noise, uniform‑airflow system creates a safer working space for medical staff and nearby occupants. Built from stainless steel and engineered for continuous operation in emergency and infectious‑disease environments.

A self‑powered, low‑profile gas‑phase fan filter unit engineered for molecular filtration using advanced adsorbent media. This model features a side‑inlet design for horizontal airflow. Its low‑vibration, low‑noise design ensures uniform airflow across activated carbon or chemisorptive beds, delivering effective removal of odors and gaseous contaminants. Built in stainless steel and compatible with remote control and networked operation for critical environments.

Configurable four‑stage air filter housings, customized to any air flow volume and may be equipped with a vast range of air filters and optional accessories. Designed for simplified maintenance, constructed from sturdy metals, dynamically built to fine tolerances for a perfect fit, the units are individually leak and pressure tested, and incorporate latching hinges. Doors can swing right, left, or be removed to improve accessibility, featuring single or dual access doors for each section, and may be equipped with a vast range of optional accessories.

Heavy‑duty G3/G4 grade pre‑filters engineered for demanding gas turbine environments. Built for high mechanical strength and resistance to moisture, mists, and fluctuating operating conditions. Their densified structure delivers superior dust‑loading capability and durability, supporting stable turbine performance and reduced maintenance.